Recommended for most applications. Cast of durable zinc alloy with 5" center hole.

Single spray jet technology ensures even water and cleaning solution coverage; eliminates uneven cleaning and streaks. 16" cleaning path. Unique, aerodynamically designed vacuum shoe with laminar flow technology increases water pick-up to dry carpets faster. Tool-free vacuum shoe and brush removal. Adjustable handle. 1.5 hp, three-stage vacuum motor and 1/3 hp brush motor for powerful cleaning. 7-gallon solution tank, 5-gallon recovery tank and 60 psi pump. 117" waterlift. Includes built-in utility storage bag. ETL Approved. Manufacturer’s three-year parts/one-year labor warranty. Shpg. wt. 118 lbs.

More absorbent than polyurethane sponges. Stronger, less likely to fall apart.

Precision-balanced chassis, 1.5 hp motor, and poly V-belt drive system, provide smooth, constant rpm with less torque and operator fatigue. Balanced pad driver is equipped with screw-lock pad holder. Heavy-duty, slow release 15 amp breaker protects against overload. Semi-pneumatic 6" main wheels and permanently mounted 4" stairway wheels for easy transporting. Handle folds to 21" for compact storage. 50-ft. power cord. “AC” type 1.5 hp motor provides constant rpm under various load conditions. Motor has an extremely long and reliable life. A vacuum-assisted start-up controls excessive torque and high amp draw as gradual contact is made with floor. Handle-mounted amp meter allows operator to set optimal pad pressure. 1500 rpm. Includes pad driver with screw lock pad holder. Accepts 20" synthetic pads. Free-floating handle. UL Listed. Shpg. wt. 123 lbs. (Cannot ship UPS.)

Five pads per case.

Combines a demand-type 100 psi solution pump and heavy-duty, dual vacuum motor system for superior, hot water cleaning results and faster drying time. Fully portable - constructed of lightweight reinforced fiberglass for maximum strength and maneuvers on 3" double ball-bearing casters. Large, 12-gallon capacity solution and recovery tank with tank overflow protection. 12" cleaning path. Comes complete with heavy-duty 12" three-jet stainless steel wand, 15-ft. crushproof vacuum hose and 15-ft. solution hose. 25-ft. power cord. 15 amp motor. 150" waterlift. Shpg. wt. 90 lbs. (Cannot ship UPS.)

For polishing, stripping, cleaning, gym floor screening, carpet bonneting and shampooing. All-steel chrome plated bell housing resists corrosion. Rugged handle has safety switch to prevent accidental start-up. Pressure trigger bar with automatic shut-off. Quick release system for fast, easy changing of pads and brushes. Foot-controlled handle lock makes adjustments easy and minimizes operator bending and fatigue. 175 rpm. Nonmarking wheels. 1.5 hp motor. ETL Approved. 20" brush diameter. 50-ft. power cord. Shpg. wt. 120 lbs.

Stainless steel for rough cleaning chores - won’t rust or splinter. Cleans pots and pans, grills, ovens; removes floor scuff marks.

Perfect to touch-up carpets and hard-to-reach areas like stairs, upholstery and automobile interiors. Includes clear, handheld tool (drip-free) with spray on/off control lever to dispense cleaning solution and vacuum up dirty solution. Recovery tank with 2" threaded drain cap for quick draining and cleaning. Vacuum exhaust uses 3M Filtrete air filter to assure clean air quality. Detachable power cord stores on cart. Built-in carrying handle. 1 hp, 786-watt, two-stage motor. Solution pump has 38 psi solution output. 9-ft. solution hose; 8-ft. recovery hose. Both solution and recovery tank each hold two gallons. Shpg. wt. 35 lbs.

Produces easily maintained, glossy, wet-look floor. 1.5 hp motor. Grip-notch belt drive and spike lead protectors. 50-ft., three-wire grounded cord. Four wheels for easy transportation. Nonmarking, wraparound bumper. Built-in drive pad assembly, balanced for vibration-free performance. All surfaces made from highly polished aluminum and chrome-plated steel. Front mounted caster to adjust pad pressure; handle mounted light to indicate when pad pressure is too heavy. 17 amp motor. 2000 rpm brush speed. UL Approved for commercial use. Shpg. wt. 94 lbs.

Combine with Utility Pad Holder PAD 405 (sold separately) to perform a variety of cleaning tasks. 4 x 10.

Stays fresh longer. Resists sponge odors, staining and crumbling caused by bacteria. Lasts through hundreds of uses. 3.6 x 6.5 x 0.9.

For use with machine speeds of 1000 to 3000+ RPM . Five pads per case.

Produces easily maintained, glossy, wet-look floor. 1.5 hp motor. Grip-notch belt drive and spike lead protectors. 50-ft., three-wire grounded cord. Four wheels for easy transportation. Nonmarking, wraparound bumper. Built-in drive pad assembly, balanced for vibration-free performance. All surfaces made from highly polished aluminum and chrome-plated steel. Strong 13.5 amp motor. 1500 rpm brush speed. UL Approved for commercial use. Shpg. wt. 90 lbs.

Five pads per case.

Red, 1/2" long, poly fibers are unevenly trimmed and widely spaced for pad holding power. Universal clutch plate attached. Fits most machines. Manufactured on a durable plastic block with riser.

Perfect for sanding dull and scuffed wood floors. Open-weave mesh design is nonloading and coated on both sides for reversible use - wet or dry. 10 screens per case.

Easily maintain a variety of flooring surfaces. Built for scrubbing, stripping, polishing, carpet cleaning and more. Built-in safety shut-off, twin capacitors, steel planetary gear drives and heavy-duty, wrap-around furniture guards. Steel construction. For stripping, scrubbing, spray buffing, polishing, sanding and more. Chrome-plated steel housing. Exclusive quick connect fold-down handle. Powerful 1.5 hp motor. 175 rpm. Triple planetary gear drive. 17" brush diameter. 50-ft. three-wire power cord. UL Listed. Manufacturer’s three-year parts/one-year labor warranty for commercial use. Shpg. wt. 123 lbs.